8850 10 2442 ghz baw f ilter d ata sheet rev j 02 - 18 - 15 - 1 of 6 - disclaimer: subject to change without notice ? 201 5 triquint product features ? ? ? 2502? C ?2690 ? ?? C ?? ? ? handling: +28?dbm (ave), +37.5? ? ? ?c ? ? ? applications ? ? ? ? ? ? ? ? csp - 1713bt p ackage: 1.7 x 1. 3 x 0.46 mm pin configuration pin no. label 9 input 6 output 7 auxi 8 n/c 1 - 5, 10 ground general description 885010 is a high - performance bulk acoustic wave (baw) notch filter designed to reject emissions in the wifi, bluetooth, and ism bands, while passing both the 2.3?ghz and 2.6?ghz wimax/lte/td wifi/bt/ism and 4?g signals within the same device or support wimax requirements in the entire 2496?? C ??2690 passes the 2.3?ghz band: wibro, wcs, band 40 and the indian 4?g band. functional block diagram ordering info rmation part no. description 8850 10 packaged part 8850 10 - evb evaluation board standard t/r size = 10 ,000 units / reel 6 7 8 9 5 10 3 2 1 4
8850 10 2442 ghz baw f ilter d ata sheet rev j 02 - 18 - 15 - 2 of 6 - disclaimer: subject to change without notice ? 201 5 triquint 1. operation of this device outside the parameter ranges given may cause permanent damage. 2. specifications are not guaranteed over o pera ting conditions. 3. power handling capability supports wimax/ofdm applications . parameter rating storage temperature ? (1) ? ?c ? ? ( 2 ) ? ?c ? (in passband, cw signal) ? ( 3 ) +28?dbm ? (ofdm?p av) input power (in passband, cw signal) ? ( 3 ) +37.5?dbm? (ofdm?pmax) absolute maximum ratings electrical specifications (1) c onditions unless otherwise noted: device temp erature = +25 c parameter (2) conditions min typ (+25 ? c) max units center fr equency - 2440 - mhz maximum insertion loss 2 305 C C C C 2520?? C ??2690 mhz (4) 2401 C C 2481?? C ??2483 mhz 2496?? C ??2506 mhz db?p c onditions unless otherwise noted: device temp erature = ?30? c to +85? c . parameter (2) conditions min typ (+25 ? c) max units maximum insertion loss 2305 C C C C 2520?? C ??2690 mhz +85? c . 7.0 at +85? c . 5.0 at ?30? c . 2.3 at ?30? c . 1.8 4.5 - - 4.0 3.5 db absolute attenuation? (4) 2401 C C 2481?? C ??2483 mhz ?30? c . 20 12 at +85? c - db input / output return loss 2 510 C 2305? C C 2520?? C ??2690 mhz db?p source impedance? (5) (single - ended) - 50 - load impedance? (5) (single - ended) - 50 - notes: 1. all specifications are based on the triquint schematic for the main reference design shown on page 3 2. in production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. typica l values are based on average measurements at room temperature , unless otherwise noted 4. relative to zero db 5. this is the optimum impedance in order to achieve the performance shown.
8850 10 2442 ghz baw f ilter d ata sheet rev j 02 - 18 - 15 - 3 of 6 - disclaimer: subject to change without notice ? 201 5 triquint pc board pcb routing detail notes: 1. top, middle & bottom layers: 1 oz copper . 2. substrates: fr4 dielectric, .031 thick . 3. finish plating: nickel: 3 - 8 ? m thick, gold: .03 - .2 ? m thick . 4. hole plating: copper min .0008 ? m thick . notes: 1. grey indicates metalized area . 2. this footprint represents a recommendation only . 3. for solder recommendation see mechanical information. reference design - 50 se input, 50 output schematic (top view) pin f unction 1 input ret gnd C connect to 10 2,3 ground C n/c 4 output ret gnd C connect to 5 5 ground C connect to 10 6 output 7 output 2 (aux 1 ) 8 n/c 9 input 10 ground bill of material reference des. value description manuf. part number l1 4.3 ?nh ? ?nh ? 1. actual matching values may vary due to pcb layout and parasitics . 2. ground paths are optimized for max attn in wlan band .
8850 10 2442 ghz baw f ilter d ata sheet rev j 02 - 18 - 15 - 4 of 6 - disclaimer: subject to change without notice ? 201 5 triquint performance plots
8850 10 2442 ghz baw f ilter d ata sheet rev j 02 - 18 - 15 - 5 of 6 - disclaimer: subject to change without notice ? 201 5 triquint pcb mounting pattern notes : 1. all dimensions are in millimeters. angles are in degrees. 2. this drawing specifies the mounting pattern used on the triquint evaluation board for this product. some modification may be necessary to suit end user assembly materials and processes. tape and reel information standard t/r size=1 0 ,000 units/reel . all dimensions are in millimeters. package information, marking and dimensions package style: csp - 1713 dimensions: 1.7 0 x 1.3 0 x 0.46 mm body: al 2 o 3 ceramic lid: kovar, or alloy 42 over ni plated . terminations: au plating 0.5 - 1.0 m, over a 2 m ni plating all dimensions shown are nominal in millimeters all tolerances are 0.15 mm except overall length and width 0.10 mm the date c ode consists of: ww = 2 digit week, y = last digit of year, m = manufacturing site code notes: 1. all dimensions shown are typical in millimeters 2. an asterisk (*) in front of the marking code indicates prototype. 0.15 1.63 0.295 0.54 0.64 0.325 1.24 0.15 0.29 a a b b 1.75 4.0 4.0 2.0 8.0 3.50 0.60 1.5 section a-a section b-b 0.63 0.250 5 max. typ. 1.47 1.88 8.8 id dot 2.0 direction of travel ?330 ?20.2 ?13.0 ?102 2.7 0.46 nom. 0.50 max. 0.24 1.54 1.70 0.55 0.205 0.45 0.20 1.15 1.30 0.235 0.24 code marking date code m 15 id dot wwy mfg site
8850 10 2442 ghz baw f ilter d ata sheet rev j 02 - 18 - 15 - 6 of 6 - disclaimer: subject to change without notice ? 201 5 triquint product compliance information esd sensitivity ratings caution! esd - sensitive device esd rating: 3a value: passes ? ? solderability compatible with the latest version of j - std - 020, lead fr ee solder, 260c refer to soldering profile for recommended guidelines. rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certa in hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? ? ? 15 h 12 br 4 0 2 ) free ? ? msl rating not applicable. hermetic package. contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1.407.886.8860 em ail: info - sales@tqs.com fax: +1.407.886.7061 for technical questions and application information: email: flapplication.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or liability whatsoever for any of the information contained herein. triqu int assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely wit h the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such informa tion does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warran ted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
|
